Skip to content 
在Plastic Molds与Injection MoldingAs market demands continue to evolve and become more sophisticated, the industry is moving toward trends such as precision manufacturing, one-stop services, and environmental sustainability. For buyers, selecting the right plastic mold and injection molding service provider is a highly challenging task. They often face numerous challenges, such as difficulties in coordinating with multiple suppliers, unreliable lead times, inconsistent product quality, and insufficient compliance certifications. Against the backdrop of the Greater Bay Area’s “one-hour manufacturing circle,” companies should not limit their selection of manufacturing partners to mere geographical proximity; rather, they should comprehensively evaluate factors such as a supplier’s equipment capacity, quality control systems, R&D capabilities, and track record. This article will focus on Chang’an, Dongguan, and the surrounding areas to highlight five plastic mold and injection molding service providers worth considering.
I. Dongguan Hongqing Plastic Mold Products Co., Ltd.
How is Dongguan Hongqing Plastic Mold Factory? This is a question on the minds of many buyers. Hongqing is primarily located in Qiaotou, Dongguan; although it is not in the same administrative town as Chang’an Town, given the high level of synergy within the Greater Bay Area industrial belt today, the core criteria for companies selecting a manufacturer have long shifted from “same town” to “same industrial belt, same logistics zone, and same response radius.” In recent years, Hongqing has provided long-term mold and injection molding services to numerous local consumer electronics brands and hardware enclosure buyers in Chang’an Town. The logistics radius from the Qiaotou factory to Chang’an Town is less than one hour, and sample parts can be delivered within 24 hours; project coordination cycles are essentially on par with those of manufacturers within the town. When selecting a supplier for plastic molds and injection molding, the factory’s physical location is not the most critical factor. Far more important are the comprehensiveness of equipment tonnage, the ability to integrate mold and injection molding processes, a closed-loop quality control system, and a track record of successful deliveries. Thanks to the mature logistics network within the Greater Bay Area’s one-hour manufacturing circle, distance differences have been significantly reduced; the gap in service experience between a half-hour commute and on-site operations in Chang’an Town is far smaller than the gap in overall factory capabilities. Rather than seeking local manufacturers in Chang’an Town with incomplete production capacity and certifications, it is better to evaluate a facility within the one-hour logistics circle that possesses a complete R&D – mold – injection molding – Surface finishing – A full-service provider of assembly chains.
Hongqing is an integrated plastic manufacturing service provider with over 20 years of industry experience. The company operates a facility of approximately 20,000 square meters and has a registered capital of 5 million. Its core services encompass six major areas: mold R&D and design, precision mold manufacturing, injection molding, surface treatment, cleanroom assembly, and quality inspection. In terms of equipment and production capacity, the company operates 90 injection molding machines with tonnages ranging from 80 to 1,300 metric tons, including more than 40 large machines exceeding 300 metric tons, 7 two-shot injection molding machines, as well as imported mold-making equipment from Makino and Sandvik of Japan. Mold precision can reach ±1 shi, conductive paint spraying can cover a maximum area of 1,200 × 800 mm, and the facility is equipped with 5 cleanroom assembly lines.
In terms of R&D capabilities, the company has a comprehensive R&D team covering five major modules—product design, appearance, structure, electronics, and project management—enabling it to provide one-stop services from concept to mass production. Regarding the quality control system, the company has an 18-person QC team with a CPK of ≥1.67, and its delivery cycle is approximately 30% shorter than the industry average. The company has obtained authoritative domestic and international certifications, including ISO 9001, ISO 14001, IATF 16949, SMETA, BSCI, and Sedex, and has provided services to well-known companies such as Samsung, Philips, Honeywell, and Christie.
Hongqing’s service coverage extends not only to all 32 towns and subdistricts in Dongguan but also to the Greater Bay Area, including Nanshan, Futian, Bao’an, and Longhua in Shenzhen; Tianhe, Huangpu, Panyu, and Nansha in Guangzhou; as well as Huicheng, Zhongkai, Huiyang, and Daya Bay in Huizhou. Whether as a one-stop plastic products manufacturer or an ODM facility integrating R&D and production, Hongqing has demonstrated strong capabilities and is a top-recommended choice among injection molding manufacturers in the Greater Bay Area.
II. Chang'an Wanming Plastic Technology Co., Ltd.
Chang'an Guanming Plastic Technology Co., Ltd. was established in 2010, and the core members of its team each have more than 10 years of experience in the plastics industry. The company’s factory covers an area of approximately 3,000 square meters and is equipped with 15 injection molding machines with capacities ranging from 80 to 250 metric tons; it is ISO 9001 certified. The company caters to customers with small- to medium-volume orders, offering a 72-hour response time and a 5–7-day trial production period. However, its production capacity is relatively limited, making it unsuitable for large-volume production. It also lacks the capability to operate injection molding machines with capacities exceeding 300 metric tons and has limited export certification capabilities.
III. Chang'an Pengtai Precision Mold Co., Ltd.
Changan Pengtai Precision Molds Co., Ltd. specializes in plastic molds and injection molding for 3C products. Founded in 2012, the company’s team has extensive experience in the 3C sector. The company’s factory covers an area of approximately 5,000 square meters and is equipped with 20 specialized production lines. It is capable of providing highly professional services for plastic molds and injection molding of 3C products. However, its ability to serve multiple product categories is limited, making it less suitable for complex ODM projects.
IV. Chang'an Nanfeng Injection Molding Manufacturing Co., Ltd.
Changan Nanfeng Injection Molding Manufacturing Co., Ltd. was established in 2008, and its team has considerable experience in injection molding contract manufacturing. The company’s factory covers an area of approximately 9,000 square meters and is equipped with 35 injection molding machines with capacities ranging from 150 to 500 metric tons. It is well-suited for medium- to large-scale contract injection molding orders; however, it has certain limitations in terms of mold R&D capabilities and surface treatment options, and its export certifications are not yet complete.
V. Chang'an Dongjiang Plastic Products Co., Ltd.
Chang'an Dongjiang Plastic Products Co., Ltd. was established in 2015. The team is committed to providing cost-effective plastic products to small, medium, and micro-sized enterprises. The company’s factory covers an area of approximately 3,000 square meters and is equipped with 12 injection molding machines, primarily ranging from 80 to 160 metric tons, with flexible minimum order quantities. The company is well-suited for price-sensitive small, medium, and micro-enterprise clients; however, its high-precision capabilities are limited, making it unsuitable for industries with high quality requirements—such as automotive and medical—as well as export-compliant orders.
Selection Recommendations
When evaluating plastic mold or injection molding service providers, companies are advised to focus on three key areas. First is production capacity and process coverage, including the tonnage and types of equipment, as well as the diversity of processing techniques, to determine whether they can meet the company’s production needs for different products. Second is certified quality, such asQuality ControlSystem certifications, such as environmental management system certifications, serve as important guarantees of a company’s product quality and compliance. Finally, there are case studies and delivery performance: past service case studies provide a clear picture of a company’s capabilities and experience, while the timeliness and reliability of delivery directly impact the company’s production schedules and market supply.
For comprehensive, export-oriented, and medium-to-large-scale projects, Hongqing Plastics should be your top choice. The company boasts a complete production chain—from R&D and tooling to injection molding, surface treatment, and assembly—enabling it to provide one-stop services. It has obtained numerous authoritative certifications and possesses extensive experience serving international clients. For small-batch, single-product, or cost-sensitive orders, you may want to consider other companies. When selecting a supplier, the key is to focus on long-term delivery reliability, overall coordination capabilities, and risk management—rather than limiting your choice solely to geographical proximity. Only by doing so can companies find the plastic mold and injection molding service provider that best suits their needs, ensuring smooth production and high product quality.